Model	SPF-120
Output	0 – 120 Vials / Minute – Single Dosing
	0 – 60 Vials / Minute – Double Dosing
	0 – 40 Vials / Minute – Triple Dosing
	0 – 30 Vials / Minute – Quadraple Dosing
Fill Capacity	50 mg to 1500 mg – Single Dosing 1.5 gm to 6 gm in multiple dosing depending upon density of the powder
Accuracy	± 1 % depending upon the consistancy & the uniformity of bulk density of powder under the controlled level of humidity I.E. Below 28 % rh
Electrical Motors	1 HP – Main Drive
	0.25 HP – Unscrambler
	0.25 HP – Scrambler
Power Requirements	415 Volt A. C., 3-Phase, 5-Wire System, 50 hertz
Conveyor Height	850 to 900 mm
Dimensions	2600 mm (l) x 965 mm (w) x 1800 mm (h)
Utilities	Nitrogen provided by the party. 2 kg / cm² max
	Vacuum at the rate of 500 l.P.M., 25” hg

Vial Body Dia	Ø23 mm TO Ø32 mm
Vial Height	75 mm
Rubber Stopper	20 mm grey butyl rubber stopper

• No vial no fill saves wastage of costly powders.
• Machine stops if vial topples at filling station.
• No stopper in chute, machine stops.
• All the parts and assemblies coming into contact with the powder & rubber stopper are made of s.S.316 l material and are easily removable for autoclaving, sterilization.
• All other parts exposed are made of S.S. 304.
• Synchronised speed of agitators in hopper, powder wheels, conveyor, vial separator, lateral belts & pressing rollers.
• Airlines will pass through pure air filter.
• Machine will be operatable at a temperature level of 10°C to 30°C & rh level of 15% to 50%.
• But the required accuracy is only acquired if maintained below 28% rh.